Home / Hot Tub Error Codes: FLO, OH, DR and More

Hot Tub Error Codes: FLO, OH, DR and More

An error code tells you what the control system detected, not always what's broken. Here's what the most common codes usually mean, what you can safely check yourself, and when to call. Code names vary by brand and control system, so check your owner's manual too.

Common codes and what they usually mean

CodeWhat it usually meansFirst thing to check
FLO / FL / FLCThe system isn't detecting enough water flowClean or remove the filter, check water level, bleed air locks
DR / Dry / dyPossible low water or air in the heaterCheck water level; bleed air after a refill
OH / OHH / HLWater or heater temperature is too highRemove the cover to let heat escape; check filter and flow
ICE / ICFreeze protection has activatedUsually normal in cold weather; make sure the tub has power and water is circulating
SNA / SNB / SN / SensorA temperature sensor isn't reading correctlyUsually needs a technician
Blank screen or "---"No communication between panel and control boardCheck power and GFCI; otherwise call

Why flow codes matter

Flow codes are the most common we see, especially at rental properties after heavy weekend use. Dirty filters restrict flow, and a heater that runs on low flow can overheat and fail. If a flow code keeps coming back after the filter is cleaned, something else is restricting water: a stuck valve, a failing pump, a pressure switch or a flow switch.

When to call

When you call, tell us the brand, the exact code shown and what the tub is doing. A photo of the panel and the equipment label helps us arrive with the right parts.

Need a hot tub technician?

Call with your spa brand, any error code on the panel and what the tub is doing. We'll confirm availability for your address and give you a straight answer on cost.

Call (570) 707-7668